Archives

Olathe West High School

Olathe West High School opened in the fall of 2017, designed using architecturally advanced techniques to create an innovative and futuristic learning environment for their students. The three-story school, spanning 375,000 square feet, focuses on the use of technology, open, modular learning spaces, efficiency and collaboration among students. A centrally-located learning commons provides student gathering and education collaboration spaces that connect to the entire building.

The school is designed with four wings where students attend classes. The building also includes an open concept Library with 60 planting boxes on a growing wall, four mini-libraries overlooking the main first floor library, a Public Safety Academy, Green Tech learning center, media center, performing arts center with retractable seating, gymnasiums with a one-ninth mile track around the top and a 200 square foot rooftop greenhouse.

Bomanite Licensee, Musselman & Hall Contractors, LLC worked with the project designers to provide a sustainable low maintenance topping and polishing technique that is becoming a standard in school construction. Musselman & Hall Contractors, LLC placed 25,000 square-feet of 2”-thick Bomanite Renaissance Deep Grind system as an unbonded topping slab integrating local aggregates and references. Once the slab was cured, it was ground down to expose the coarse aggregates and then polished to a semi-gloss concrete finish.

“Bomanite’s Renaissance Deep Grind is a high-end, readily customized decorative concrete that really bring designs to life,” says Dan Kroesen, a Vice President with Musselman & Hall Contractors. The Bomanite Renaissance Deep Grind polished concrete system represents a custom mix of individually sourced aggregates, sands, and added integral colors that can be installed as a slab on grade or unbonded overlay. Once the concrete sets, it is milled, ground, and finally polished to produce a beautiful, solid surface that looks and wears very similar to terrazzo.

While every type of flooring requires regular maintenance, one of the advantages of the Bomanite Renaissance Deep Grind process is the long-term cost positives. Because the floor is treated with chemical hardeners that reduce porosity, while still allowing it to breath, fully-exposed hard aggregates are the predominate wear surface rather than an applied sealer or coating. Correctly selecting aggregates by size, type, and color allows the floor to wear naturally while supporting superior stain resistance to traditional concrete because no film-forming agents are required to maintain a Bomanite Renaissance floor.

The Bomanite Renaissance system checks a lot of boxes – tremendous design flexibility, first-cost savings, lower cost maintenance, making Bomanite Decorative Concrete the right investment for long lasting beauty and benefit for school construction projects and its communities.

Cerner Trails Office Campus

The Cerner Trails project included a polished concrete topping slab installed at the new Cerner Corporation Headquarters near I-435 and Bannister Rd in southeast Kansas City, Missouri. Cerner is an international healthcare software company. With its third office development in the Kansas city area, the 650,000-square-foot campus includes office, conference and support spaces for 4,000 employees, a dining facility and health clinic. It is the one of the most technologically advanced and wireless office buildings in the country.

Bomanite Licensee, Musselman & Hall Contractors, LLC worked closely with the local architecture firm Gould Evans during the design development phase of the project for Cerner Continuous Campus. A ribbon-cutting ceremony was held in March 2017 to celebrate the grand opening of the campus, which will be the largest development projects in Missouri’s history by the time it is fully built out. The new Continuous Campus signifies Cerner’s commitment to the future of healthcare management. The building is not only an expression of Cerner’s work, but a reflection of the values of a company pioneering the digital age of the medical industry. Gould Evans designed the campus as a centerpiece of Cerner’s strategy to draw top technology talent to the Kansas City area to solve the complex challenges of their health care clients.

In working with Gould Evans, Musselman & Hall Contractors, LLC assisted with the project specifications and samples. Musselman & Hall, the design team and owner’s representatives met multiple times to discuss project particulars and review samples until the team was able to fine tune the project finishes.

The lobby, corridors, common spaces, dining hall and cafe of the new facility were completed utilizing the Bomanite Renaissance custom polished concrete system. Musselman & Hall placed nearly 50,000 SF of 3” thick, integrally colored, unbonded topping slab. The slab was integrally colored with Bomanite Natural Gray.

After the topping slab had cured sufficiently, Musselman & Hall began the polishing operation. The slab was ground to a course aggregate exposure, densified with Bomanite Stabilizer Pro and polished to a semi-gloss sheen after which the floor was treated with Bomanite VitraFinish and burnished.

Musselman & Hall worked closely with the General Contractor’s team, JE Dunn Construction, to coordinate the completion of the highly decorative work, resulting in a high-end architectural concrete finish ready for the technological wave of the future and beyond.

Cypress Waters Building Lobby

Cypress Waters is the newest 1,000-acre master-planned community to rise up in the Dallas/Fort Worth Metroplex. Just five minutes from the DFW International airport, Cypress Waters is centered around a serene 300-acre lake, that entails office, multi-family and retail waterfront developments. The owners, Billingsley Co, wanted Cypress Waters to infuse waterfront living with the design principles of new urbanism and sustainable design. Their goal was to emphasize the benefits of a live / work community, and interconnect over 4.5 million square feet of office space with retail, parks, trails, and a lakeside town center.

Bomanite Licensee, Texas Bomanite was brought in by the General Contractor, Adolfson & Peterson Construction to polish and seal 4,500 square feet of interior concrete flooring in the lobby of the 225,000 square foot office building at 9111 Cypress Waters Blvd.  Designed by GFF Architects, Texas Bomanite lended to the modern, sustainable design of the architecture by polishing the concrete to a 1,500 grit with a salt and pepper finish. Texas Bomanite utilized the Bomanite Custom Polishing VitraFlor system; which consisted of grinding, chemical hardening with Bomanite Stabilizer Pro, and honing and polishing with Bomanite VitraFinish.

Prior to the final installation of the project Texas Bomanite also provided a 100 square foot mock-up, which allowed the architects and General Contractors a solid idea of exactly what the finished product would look like.  Even the results on plain concrete can be stunning. The Bomanite Custom Polishing VitraFlor system can be utilized on existing or new uncolored concrete.

Bomanite VitraFlor utilizes select un-colored concrete that is placed and finished to standards required for decorative polished concrete flooring. The concrete is ground to expose the desired amount of aggregate, then polished to the required gloss level and treated with a Bomanite stain resist. The primary benefit to Bomanite VitraFlor is the simplicity of installation and durability of the finished floor, lending to its low-maintenance and long-term sustainable features.

Texas Bomanite received the 2018 Honorable Mention Bomanite Custom Polishing Systems Award for their outstanding decorative concrete work on the 9111 Cypress Waters Blvd. Business Complex.

Angeline by Michael Symon Restaurant (Modena SL)

Located in Atlantic City’s Marina District, the Borgata Hotel Casino & Spa is steadfast at introducing diverse, innovative and world-class dining experiences. Guests looking for a one-of-a-kind culinary experience on the East Coast will find that the Borgata offers a wide array of restaurants and world-renowned chefs under one roof, including Wolfgang Puck (Wolfgang Puck American Grille), Bobby Flay (Bobby Flay Steak), Michael Schulson (Izakaya Modern Japanese Pub), Geoffrey Zakarian (The Water Club hotel at Borgata), restaurateurs Greg and Marc Sherry (Old Homestead Steak House) and now Michael Symon’s Angeline.

Angeline is Iron Chef and James Beard Award winner chef Michael Symon’s ode to classic Italian food, inspired by his heritage and personal history. Growing up with Greek and Sicilian influences, Michael Symon creates meaningful dishes that showcase his unabashed love for food, passionate hospitality and zest for life. The menu captures nostalgia with red-sauce style favorites from family recipes, including his mother Angeline’s Sunday Sauce. The design of the restaurant needed to reflect this balance of old and new world.

Parts and Labor Design, a New York-based interior design firm, whose breadth of work includes restaurants, bars, hotels and retail projects at every scale, collaborated with Philadelphia’s famed Cope-Linder Architects to pull together the design of the 8,200-square-foot Italian restaurant Angeline by Michael Symon. The 223-seat fine dining experience features a bar area, main dining room and private dining space, with the intent to showcase the soulful cooking and joyful personality synonymous with the award-winning chef. It’s described as a mix of casino glam with the comfortable familiarity of a typical neighborhood Italian restaurant.

Bomanite Licensee, Beyond Concrete, having worked previously on several other top-chef restaurants at the Borgata, was brought in by Cope-Linder Architects to make sure the restaurant interior flooring was up to the design standards and within budget. Knowing the specification called for approximately 1,800 of square feet of polished concrete floors, Beyond Concrete proceeded with showcasing several custom samples with variety of colors and depth of exposure, to the architect as well as to ABC’s The Chew co-host Chef Michael Symon. The Bomanite Modena SL Custom Polishing System was chosen for its sleek and modern design, complimenting the mixed media used throughout the dining establishment.

In preparation for the Bomanite Modena SL System the floorings base slab needed to be corrected as it was extensively out of level and in poor condition. Custom colors in black and brown pigments were mixed for the final color placement of the Bomanite Modena SL System. Once cured, the flooring was ground and polished to a medium satin finish and given two coats of Bomanite Stainguard for that final seal and durable protection. Beyond Concrete’s expertise in the field made sure that the high-end restaurant was engineered for a super star review.

The Bomanite Modena Custom Polishing System is an engineered interior cementitious topping that is blended with selected aggregates and then ground and polished to the desired gloss level. The Modena system transforms existing or worn surfaces into beautiful walkways, showrooms, restaurants and lobbies and is available in a range of colors and patterns using decorative sawcuts. Additional topically applied stains and a variety of aggregates, such as recycled glass or porcelain along with regionally sourced materials, are all options in creating a beautifully designed, environmentally friendly and functional floor. The Modena system is a low-cost alternative for renovation projects and provides the durability and strength for this exceptionally long lifespan system. With the industry’s lowest lifecycle costs, low to zero VOC and minimal maintenance requirements, Modena by Bomanite is the optimal choice for renewed surfaces.

AWARDS: Beyond Concrete received the 2018 Best Bomanite Custom Polishing Project Honorable Mention Award for their work on Angeline by Michael Symon.

Starbucks Brookside (Modena SL)

The General Contractor, J.E. Foster Building Company, contacted Bomanite Licensee, Musselman & Hall Contractors, LLC about a new Starbucks Coffeehouse being built in the Brookside community of Kansas City. Starbucks was considering the incorporation of new flooring material in a prototype store.

Starbucks design studios are located around the world so that their designers can fully understand the communities they serve. The mission of each designer is to create a spectacular Starbucks café experience that is steeped in the local culture and reflects the unique characteristics of each neighborhood.

Starbucks believes a coffeehouse should be a welcoming, inviting and familiar place for people to connect, so they design their stores to reflect the unique character of the neighborhoods they serve. They are also interested in the way design can connect everyone to sustainable building practices and provoke thoughtful questions and engagement with the built environment. To guide their building and design efforts, Starbucks uses the U.S. Green Building Council’s LEED® certification program as a benchmark for success.  In addition to reducing energy and water consumption, they incorporate reused and recycled materials wherever possible and often use locally inspired design details and materials in their stores.

After some research and several references, the general contractor worked with the local contractor Musselman & Hall for assistance. Based on a tile sample provided by the Starbucks design team and an overall design concept, Musselman & Hall produced a series of Bomanite Custom Polishing Modena SL samples for the client’s consideration. The samples immediately impressed the Starbucks staff.

The Modena System, unique to Bomanite, is a trowel applied cementitious overlay that contains zero VOC and no solvents in the chemically hardening product with attributes to its “Low-Emitting Materials” LEED credits. Modena is polished to a highly durable finish and is commonly used to renovate floors that are unacceptable candidates for polished concrete. It can be applied as thin as 1/8” or as thick as ¾” dependent upon existing elevations. Modena can be either highly decorative with aggregate exposure or simpler with light aggregate exposure similar to finely ground concrete.

The Modena system contributes to additional LEED accrual points in “Innovation by Design” by its ability to renovate an existing concrete slab that would otherwise be unsuitable for concrete polishing. This provides specifiers the ability to use polished concrete much as they would traditionally select a manufactured tile or other flooring system only without the maintenance requirements. Bomanite Modena is more economical than typical terrazzo, is breathable which minimizes moisture vapor issues, can be colored in any color, lessens the amount of product brought to a jobsite compared to stone or tile and provides all the benefits of polished concrete.

The relatively small project (600 SF) utilized the Bomanite Nickel Gray Integrally Colored Bomanite Modena SL system. The polished overlay was placed at approximately ½” thick. The overlay was ground and polished to a 400-grit finish. Musselman & Hall coordinated with Starbucks artist who utilized a portion of the floor as a canvas to paint a fun and colorful mural. This is the first Starbucks location in the region to utilize the Bomanite Custom Polishing Modena SL flooring system.

The finished floor is a simple, but elegant representation of the design flexibility of decorative architectural concrete and Bomanite’s diverse sustainable offering of floor systems.

AWARDS: 2018 Bomanite Custom Polishing Project – Honorable Mention

Infinite Campus (Modena Monolithic, Renassiance)

Infinite Campus is the largest U.S. owned K-12 student information management firm that is nestled among natural wetlands and a city park. Wanting to allow views to the exterior natural elements, the Finn Daniels Architect firm made sure the design incorporated architectural precast concrete wall panels, a glass curtain wall, and metal panels to provide views as well as creating an energy efficient building. The interior features open work spaces, two story garden elements with crossing bridges, a central rotunda, training rooms, and a full food service cafeteria.

When planning the cafeteria, the owner, Infinite Campus and Finn Daniels Architects wanted a free-flowing design that would complement existing epoxy terrazzo floors and carpet. The area needed to work with the natural elements already set and required low maintenance with a reflective sheen. During the conceptual stage the design team determined that the decorative concrete indoor flooring project should emulate the feeling of a sandy beach or shoreline which would shimmer and glisten like shells and sea glass in the sun. Bomanite Licensee Concrete Arts, Inc. provided the natural beach look by installing the Bomanite Custom Polishing Systems with Bomanite Modena Monolithic for the winding middle sea shell area and Bomanite Renaissance Deep Grind for the shoreline perimeter.

The two unique appearances were accomplished by first pouring the two perimeter pours of Bomanite Renaissance utilizing integral color to achieve the desired shade of concrete. Then the Bomanite Modena Monolithic portion was poured to complete the winding area in between. The soft gray color of the Bomanite Modena Monolithic was enhanced with black and blue natural aggregates blended with blue recycled glass. Mirrored glass, sea shells and mother of pearl were also hand-seeded to create the shimmer and iridescence reminiscent of that perfect beach feel.

Bomanite Modena Monolithic is a poured-in-place monolithically bonded concrete overlay utilizing integral colorants blended with engineered cements and aggregates. Bomanite Renaissance Deep Grind is a poured-in-place colored concrete slab with selected aggregates ready-mixed and finished to receive a deep grind and polish. Once both areas were placed and sufficiently hardened, Concrete Arts began the grinding and polishing process. This exposed the beauty of the glass and aggregate while providing a low maintenance, durable surface with great sheen and light reflectivity.  When the sun shines through the glass curtain wall on the new cafeteria floor it evokes that happy feeling like a day at the beach.

The American Fallen Soldiers Project

The American Fallen Soldiers Project was borne of an idea that professional artist, Phil Taylor, had upon learning that his childhood friend, Capt. Blake Russell, had been killed in Iraq in 2006. Inspired by stories of Blake’s patriotism and courage during the funeral, Phil knew that he wanted to contribute to the Russell family’s healing process, so he painted a portrait of his childhood friend for them.

The family’s reaction to the portrait changed Phil’s life forever and he began the American Fallen Soldiers Project. Since its inception in 2007, hundreds of portraits have been painted and presented to families of fallen soldiers all over the country.

The American Fallen Soldiers Project National Gallery opened its doors in mid-2016, with 5,000 Square feet of gallery and office space. Texas Bomanite polished and dyed 3,040 square feet of concrete in Bomanite’s Black Orchid using the Bomanite Patene Teres system and polished it to a 400 grit. The Polyurea Joint Filler was in the color Gauntlet Grey. To keep costs down for this very special project, Texas Bomanite discounted the retail price as a donation towards the project’s success.

This beautiful gallery and tribute to American’s fallen heroes is located at 4275 Kellway Circle, Suite 132 in Addison each weekday from 10AM-5PM. Texas Bomanite was honored to be a part of this special space. For more information, visit https://americanfallensoldiers.com.